1. Product introduction

The putty powder mortar production line adopts the horizontal double-spiral inner stirring structure, so that the material can be oscillated up and down, and the left and right shifting three-dimensional high-speed movement, thereby achieving the purpose of mixing the material quickly and evenly. Because the equipment uses the main structure such as inclined feeding, spiral two-way mixing, and bag filling, it has fast feeding, high-speed mixing, fast filling, dust removal, stable and reliable performance, simple operation, and economical and practical. Excellent performance, easy to maintain and maintain.

The powder materials are calculated according to the proportion of the formula and then enter the putty powder mortar line production equipment, and the materials are mixed under the push of the ribbon spiral blades. The outer ribbon pushes the material from one end to the other, and the inner ribbon moves the material in the opposite direction. The inner layer is pushed to one side and then rolled inside and out, and the outer material is pushed to the other side. Rolling outwards. During the convection process, the two material streams are mutually infiltrated, mixed and mixed, and then mixed in the tumbling process on both sides, which is repeated several times, and finally the uniformly mixed material is discharged from the discharge port by the discharge control mechanism. Out. The horizontal dry mortar equipment has faster mixing speed, higher uniformity and lower maintenance rate than the traditional vertical dry powder mixer.

2. Specifications

Model	500type	1000type	2000type
Motor Power（KW）	5.5	7.5	11
Speed / minute（r/min）	24	24	24
Cylinder size diameter x length（mm）	Φ800×1670	Φ1050×1880	Φ1350×2400
Total size length x width x height（mm）	2800×810×1780	3200×1100×2000	3600×1350×2600
Full capacity	850L	1800L	3500L
Production capacity（kg/batch）	500	1000	2000
Yield（T/h）	1—1.5	2--3	4--5
Mixing uniformity	98%	98%	98%
Mixing time	3~6min	3~6min	3~6min