1. Product introduction
The machine is a horizontal computerized metering mixer with spiral discharge, U-shaped mixing drum, double-layered inner and outer ribbons, tumbling on both sides, no block on the wall, no dead angle, fast mixing speed and high uniformity; Feeding hoist, the feeding port can be flush with the ground, and the feeding is convenient. The whole machine runs smoothly, has low noise, and is easy to install. It is widely used for the production of dry powder coating, putty powder and other powder materials. In order to facilitate the user's finished product packaging, the electric discharge device and the computer metering device are added on the basis of manual discharge, and the discharging speed is fast; the measurement accuracy is high, and 1-2 people can operate, eliminating the trouble of weighing the package. It saves labor and time, achieves a substantial increase in production during limited working hours, and is economical and practical. In addition, it is made of stainless steel and can also be used in the production of various dry powder food materials. We also provide a full range of technical services for new and existing customers, providing real and mature formula support.
Advantages of computer metering equipment:
1. The operation is simple, the equipment only needs 1~2 people, and the production efficiency is high.
2, the equipment has a small footprint, strong installation integrity, superior performance of various components, long maintenance period of major components, so that you have no worries!
3. The equipment has stable performance and long service life.
4, using the corresponding valve pocket for packaging, free of weight-free weighing and sealing, enough to stop, can be loaded immediately.
working principle
When the dry powder mixer is working and mixing, the material in the machine is subjected to two oppositely rotating spiral belts, and the reverse composite motion is carried out. The spiral belt carries the anti-clockwise rotation along the inner wall of the machine groove, and the animal material is turned around on the one hand, and the other In the area where the two layers of spiral ribbons overlap, the weight loss zone is formed. In this area, regardless of the shape, size, and density of the material, the material can be in a state of weightlessness instantaneously, which makes the material form a omnidirectional continuous in the machine slot. The cycle is flipped and interlaced to achieve a fast mixing and uniform effect. The feeding and discharging system is a spiral auger structure, and the bag opening is used to fix the bag (requires air pump)
2. Specifications
|
Equipment model |
Model /kg |
Main motor /kw |
Lift motor /kw |
Transmission model |
Mixing drum volume /m³ |
Spindle speed |
|
|
Gearbox |
Cycloidal needle |
||||||
|
DB-0.5 |
500 |
5.5 |
3 |
ZQ250 |
XWD5 |
0.83 |
24 |
|
DB-1.0 |
1000 |
7.5 |
3 |
ZQ350 |
XWD7 |
1.65 |
24 |
|
DB-1.5 |
1500 |
11 |
4 |
ZQ400 |
XWD8 |
2.28 |
24 |
|
DB-2.0 |
2000 |
11 |
4 |
ZQ400 |
XWD8 |
2.48 |
24 |
|
DB-3.0 |
3000 |
15 |
4 |
ZQ500 |
XWD9 |
4 |
24 |
|
DB-5.0 |
5000 |
30 |
4 |
ZQ650 |
XWD10 |
5 |
|
