The filter is a pressure type filtering device, and the liquid flows into the filter bag from the side inlet pipe of the filter casing. The filter bag itself is installed in the reinforcing net, and the liquid permeates through the filter bag of the required fineness level. Qualified filtrate, impurity particles are captured by the filter bag. The machine is very convenient to replace the filter bag, and the filter is basically free of material consumption.
1. Product introduction
use
Paint, beer, vegetable oil, medicine, cosmetics, chemicals, petroleum products, textile chemicals, photographic chemicals, plating solutions, milk, mineral water, hot solvents, latex, industrial water, sugar water, resins, inks, industrial wastewater, Juice, cooking oil, wax, etc.
working principle
The microcomputer bag filter is a multi-purpose filter device with novel structure, small size, simple and flexible operation, energy saving, high efficiency, closed working and strong adaptability.
The microcomputer bag filter mainly consists of micro-computer control, filter cylinder, filter cylinder cover and quick opening mechanism, stainless steel filter bag reinforcement net and other main components.
The filter is a pressure type filtering device. The liquid flows into the filter bag from the side inlet pipe of the filter casing. The filter bag itself is installed in the reinforcing net, and the liquid permeates through the filter bag of the required fineness level. Qualified filtrate, impurity particles are captured by the filter bag. The machine is very convenient to replace the filter bag, and the filter is basically free of material consumption.
Filtration operation and precautions
1. The machine is easy to operate. When using, just install the filter bag of the required fineness level in the filter cylinder, check whether the sealing O-ring is intact, and then tighten the filter cylinder cover ring bolt to put it into operation.
2. After the pump is started, the pressure on the filter rises slightly, and the initial pressure is about 0.05MPa. As the use time is extended, the filter residue in the cylinder gradually increases. When the pressure reaches 0.4MPa, the cylinder head should be stopped to check the slag of the filter bag. The replaceable filter bag can be used continuously (the filter bag can be reused by cleaning).
3, the filter cylinder pressure is generally adjustable at 0.1-0.3MPa is more suitable, which can be adjusted by the return valve or the pump on the return valve, the filter cylinder pressure will damage the filter bag and the protection net, must pay special attention.
4. The air valve on the filter cylinder cover is a hose for exhausting or connecting air or inert gas to press out the remaining material.
5. The filter must be cleaned and kept clean at all times after each use to ensure that the next filtration effect is good.
2. Main specifications and technical parameters
|
Model
|
Filtration area（㎡）
|
Import and export trail
|
Maximum flow rateM3/h
Viscosity=1cm
|
Maximum working pressure(Mpa)
|
Maximum working temperature（℃）
|
Nominal filtration accuracy（μm)
|
|
DL-1P1S
|
0.25
|
φ40
|
18
|
0.6
|
12O
perating temperature is related to the use of filter bag material
|
1、5、10、
15、25、40、
50、65、75、
80
100···1200
|
|
DL-1P2S
|
0.5
|
φ40
|
36
|
|
DL-4P1S
|
1
|
φ80
|
70
|
|
DL-4P2S
|
2
|
φ80
|
140
|
|
DL-6P2S
|
3
|
φ150
|
210
|
|
DL-8P2S
|
4
|
φ200
|
280
|
|
DL-10P2S
|
5
|
φ250
|
350
|
|
DL-12P2S
|
6
|
φ250
|
420
|
|
DL-16P2S
|
8
|
φ300
|
560
|
|
DL-20P2S
|
10
|
φ350
|
700
|
|
DL-24P2S
|
12
|
φ350
|
840
|
