1. Product introduction

The 10 ton horizontal real stone paint mixer can be used for scraping walls and mixing. When running, the material can be three-dimensionally tumbling, which is a quick and even mixing of materials, and effectively eliminates dead spots and material wall. When mixing, the material can be stirred, mixed, blended, homogenized, etc. During the mixing process, feed control, discharge control, mixing control and other automatic control can be realized.

 10 tons of horizontal real stone paint equipment structure and structure:

The mixing barrel body, the stirring barrel cover, the agitator, the bracket, the transmission device, the shaft sealing device and the like can be configured, and the heating device or the cooling device can also be configured according to the process requirements.

 The material selected for the mixing barrel, mixing barrel cover, agitator, shaft seal, etc. can be made of carbon steel or stainless steel according to different process requirements; the mixing barrel and the mixing barrel cover can be flanged or welded. The mixing barrel and the mixing barrel cover can open the process pipe hole for feeding, discharging, observation, temperature measurement, pressure measurement, steam fractionation, safety venting, etc. according to the process requirements; the upper part of the mixing barrel cover is equipped with a transmission device (motor or reducer) The agitator in the agitating tank is driven by the drive shaft. The shaft sealing device can be in various forms such as machine seal or packing, labyrinth seal, etc. (determined according to user needs); due to different production process requirements of the user, the agitator can be configured in various forms such as slurry type, anchor type, frame type and spiral type. If you have other requirements, you can contact the factory and design and make it separately.

  The 10 ton horizontal real stone paint mixer independently developed by our factory is designed according to the special performance of real stone lacquer. It adopts multi-spiral mixing, uniform mixing, fast mixing speed, and completely solves the important problem of rust in the liner. Updated ordinary carbon steel real stone paint mixers and equipment for expansion.

Real stone paint equipment - Real stone paint mixer, also known as real stone paint mixer, is a professional production equipment for real stone paint. Real stone paint is a very thick and thick architectural paint, which is made of synthetic resin emulsion and different grades. Formulated with colored sand particles and various additives, its production process is different from that of general architectural coatings. It does not require high-speed mixing or grinding processes, mainly the process of material mixing, so it cannot Production equipment using common paints should be produced using a mixer suitable for mixing thick slurries.

Real stone paint mixer This equipment can make three-dimensional rollover of materials when running, which is a quick and even mixing of materials, and effectively eliminate dead corners and material wall. The high-speed dispersing emulsifier is suitable for pulverizing, mixing, homogenizing, dispersing, emulsifying, and accelerating the dissolution of various liquid-based powder groups.

Features:

1. The horizontal real stone paint mixer is upgraded on the basis of the traditional horizontal real stone paint mixer, which is more convenient to use.

2, stable operation, low noise, long service life, convenient installation and maintenance, is the ideal product for the mixing of real stone paint and other paste materials;

3. The contact material is made of stainless steel or carbon steel.

4. This product adopts gear reducer to slow down the spindle speed and avoid overflow of finished product caused by excessive speed of the mixer when discharging.

5. Suitable for small and medium-sized investors with a plant height of less than 3 meters, saving time and effort, and convenient operation. It is a relatively advanced real stone paint production equipment.

The real stone paint mixer produced by our company is a special equipment for producing real stone paint. It has the following characteristics: convenient feeding and feeding, small floor space and high production efficiency. It is the first choice for producing real stone paint.

Working principle: This product adopts U-shaped design and double-layered belt design inside. That is, two or more belts with the same conveying capacity, different screw diameters, and different turning directions are mounted on the horizontal main shaft. Usually, when the spindle rotates, one ribbon transports the material from left to right, and the other ribbon transports the material from right to left. Therefore, a convection interpenetration mixing action occurs in the machine to achieve the purpose of uniform mixing.

2. Specifications

Model	DB-10
Power (KW)	30
Stirring amount（T）	10
Dimensions (M)	5*3*3.5
Equipment weight (KG)	3700