1. Product introduction
Working principle: The glue mixer uses high-efficiency and fast mixing material to move the spiral belt of the stirring shaft, so that the inner and outer spiral belts turn the animal material in a large range, the inner spiral belt moves the material laterally, and the outer spiral belt moves the material from The side moves inward, so that the material is blended back and forth, and some of the material is pushed by the spiral belt to move radially along the axial direction to form a convection cycle. Due to the agitation of the movement, the material is quickly and evenly mixed in a specific time.
The materials selected for the mixing tank, the mixing tank lid, the agitator, and the shaft seal can be made of carbon steel or stainless steel according to different process requirements. The agitating tank and the agitating tank lid may be flanged or welded. The mixing tank and the stirring tank lid can be used to open the feed, discharge, observation, temperature measurement, pressure measurement, steam fractionation, safe venting and other process tube holes according to the process requirements. The LHW type drum glue glue mixer has a full circular shape. Compared with the U-shaped cylinder, it is mixed with three hundred and sixty degrees, and there is no block on the wall, and one end is directly packed. The mixing uniformity relative deviation is ≤ 5%, and the mixing time is 3-5 minutes. Small footprint, easy operation, simple maintenance, residual, sealed, no vibration, less dust. It is suitable for the mixed R&D design of small enterprises such as internal and external thermal insulation glue, glue glue, glue coating, glue glue, chemical, feed and other glue materials.
Product introduction
Working principle: The glue mixer uses high-efficiency and fast mixing material to move the spiral belt of the stirring shaft, so that the inner and outer spiral belts turn the animal material in a large range, the inner spiral belt moves the material laterally, and the outer spiral belt moves the material from The side moves inward, so that the material is blended back and forth, and some of the material is pushed by the spiral belt to move radially along the axial direction to form a convection cycle. Due to the agitation of the movement, the material is quickly and evenly mixed in a specific time.
The materials selected for the mixing tank, the mixing tank lid, the agitator, and the shaft seal can be made of carbon steel or stainless steel according to different process requirements. The agitating tank and the agitating tank lid may be flanged or welded. The mixing tank and the stirring tank lid can be used to open the feed, discharge, observation, temperature measurement, pressure measurement, steam fractionation, safe venting and other process tube holes according to the process requirements. The LHW type drum glue glue mixer has a full circular shape. Compared with the U-shaped cylinder, it is mixed with three hundred and sixty degrees, and there is no block on the wall, and one end is directly packed. The mixing uniformity relative deviation is ≤ 5%, and the mixing time is 3-5 minutes. Small footprint, easy operation, simple maintenance, residual, sealed, no vibration, less dust. It is suitable for the mixed R&D design of small enterprises such as internal and external thermal insulation glue, glue glue, glue coating, glue glue, chemical, feed and other glue materials.
|
Model |
Nominal volume |
Inner pot size |
Reducer model |
Motor Power （KW） |
Rotating speed（RPM） |
Remarks |
|
DB-50L |
50 |
400*400 |
M1 |
0.75 |
0-85 |
The data in this form is for reference only, and the actual parameters are designed according to specific process requirements, material viscosity, etc. |
|
DB-100L |
100 |
500*500 |
M2 |
1.1 |
0-85 |
|
|
DB-500L |
500 |
900*750 |
M3 |
2.2 |
0-85 |
|
|
DB-1000L |
1000 |
1200*750 |
M4 |
4 |
0-85 |
|
|
DB-2000L |
2000 |
1300*1500 |
M4 |
7.5 |
0-85 |
|
|
DB-3000L |
3000 |
1500*1500 |
M4 |
11 |
0-85 |
|
|
DB-5000L |
5000 |
1800*1800 |
M4 |
15 |
0-85 |
|
|
DB-6000L |
6000 |
1800*2100 |
M5 |
18.5 |
0-85 |
|
|
DB-10000L |
10000 |
2200*2300 |
M6 |
22 |
0-85 |
|
|
DB-20000L |
20000 |
2700*3000 |
M7 |
37 |
0-85 |
|
|
DB-30000L |
30000 |
3000*3500 |
M8 |
55 |
0-85 |
123.33Working principle: The glue mixer uses high-efficiency and fast mixing material to move the spiral belt of the stirring shaft, so that the inner and outer spiral belts turn the animal material in a large range, the inner spiral belt moves the material laterally, and the outer spiral belt moves the material from The side moves inward, so that the material is blended back and forth, and some of the material is pushed by the spiral belt to move radially along the axial direction to form a convection cycle. Due to the agitation of the movement, the material is quickly and evenly mixed in a specific time.
The materials selected for the mixing tank, the mixing tank lid, the agitator, and the shaft seal can be made of carbon steel or stainless steel according to different process requirements. The agitating tank and the agitating tank lid may be flanged or welded. The mixing tank and the stirring tank lid can be used to open the feed, discharge, observation, temperature measurement, pressure measurement, steam fractionation, safe venting and other process tube holes according to the process requirements. The LHW type drum glue glue mixer has a full circular shape. Compared with the U-shaped cylinder, it is mixed with three hundred and sixty degrees, and there is no block on the wall, and one end is directly packed. The mixing uniformity relative deviation is ≤ 5%, and the mixing time is 3-5 minutes. Small footprint, easy operation, simple maintenance, residual, sealed, no vibration, less dust. It is suitable for the mixed R&D design of small enterprises such as internal and external thermal insulation glue, glue glue, glue coating, glue glue, chemical, feed and other glue materials.ni sh
1. Product introduction
Working principle: The glue mixer uses high-efficiency and fast mixing material to move the spiral belt of the stirring shaft, so that the inner and outer spiral belts turn the animal material in a large range, the inner spiral belt moves the material laterally, and the outer spiral belt moves the material from The side moves inward, so that the material is blended back and forth, and some of the material is pushed by the spiral belt to move radially along the axial direction to form a convection cycle. Due to the agitation of the movement, the material is quickly and evenly mixed in a specific time.
The materials selected for the mixing tank, the mixing tank lid, the agitator, and the shaft seal can be made of carbon steel or stainless steel according to different process requirements. The agitating tank and the agitating tank lid may be flanged or welded. The mixing tank and the stirring tank lid can be used to open the feed, discharge, observation, temperature measurement, pressure measurement, steam fractionation, safe venting and other process tube holes according to the process requirements. The LHW type drum glue glue mixer has a full circular shape. Compared with the U-shaped cylinder, it is mixed with three hundred and sixty degrees, and there is no block on the wall, and one end is directly packed. The mixing uniformity relative deviation is ≤ 5%, and the mixing time is 3-5 minutes. Small footprint, easy operation, simple maintenance, residual, sealed, no vibration, less dust. It is suitable for the mixed R&D design of small enterprises such as internal and external thermal insulation glue, glue glue, glue coating, glue glue, chemical, feed and o
